BCMRG - RE-PNEU A SIDE

  • MSDS: BCMRG
  • Manufacturer: ARNCO
  • Product Name: RE-PNEU A SIDE
  • National Stock Number: 8030-00N006397
Product Identification

Product ID:RE-PNEU A SIDE
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006397
MSDS Number: BCMRG

Responsible Party
ARNCO

Emergency Phone: 213-567-1378

Cage: 9J663

Contractor
ARNCO

Cage: 9J663

Ingredients

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <10%

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Hazards

Effects of Overexposure:IRRIT OF MUCOUS MEMBRANE,RESP
TRACT,COUGH,HEADACHE,SHORTNESS OF BREATH & ALLERGENIC SENSITIVITY

First Aid

First Aid:EYE: IMMEDIATELY FLUSH WITH WATER 15 MINUTES,GET MED ATTN.
SKIN: FLUSH WITH SOAP & WATER,REMOVE CONTAMINATED CLOTHING.
INHALATION: REMOVE FROM EXPOSURE.

Fire Fighting

Flash Point:392F/200C (OC)
Extinguishing Media:WATER SPRAY,CARBON DIOXIDE,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP

Accidental Release

Spill Release Procedures:LIQUIDS MAY BE TAKEN UP ON
SAND,CLAY,EARTH,FLOOR ABSORBANT OR OTHER ABSORBANT MATERIAL,SHOVEL
INTO OPEN CONTAINERS,REMOVE FROM AREA & TREAT WITH WATER CONTAINING
1% AMMONIA.

Handling

Handling and Storage Precautions:MUST BE STORED IN TIGHTLY CLOSED
CONTAINERS & PROTECTED FROM MOISTURE. STORE AT TEMPS BETWEEN
60-95F/15-35C

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
PART A OF A 2 PART KIT

Chemical Properties

Boiling Pt:B.P. Text:400F/205C
Spec Gravity:1.01
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER LIQUID,SHARP,PUNGENT ODOR

Stability

Stability Indicator/Materials to Avoid:YES
WATER,STRONG BASES,STRONG OXIDIZING AGENTS.

Disposal

Waste Disposal Methods:BY METHODS CONSISTENT WITH LOCAL,STATE & FEDERAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.